Quality-Focused Construction for Optimal Performance
Our Blackline ratchet straps are crafted with meticulous attention to detail, ensuring superior durability and performance. With a longer fixed end than most standard straps, the ratchet is positioned further from the anchor point for better access and ease of use. Additionally, a sewn loop is built-in next to the ratchet, allowing you to wrap up the excess strap and securely tuck it into the loop for a tidy appearance.

Industrial-Grade Webbing for Maximum Strength
The industrial-grade polyester webbing used in our Blackline ratchet straps is designed to withstand the harshest conditions. With a webbing break strength of 13,000 lbs., it is stronger than typical 2" webbing, thanks to the thicker yarn and more picks per inch used in its construction. The heat-sealed ends and thicker edges made from concentrated webbing provide additional resistance to abrasion, tearing, and cutting, ensuring that your ratchet straps will last for years of heavy use.

Corrosion-Resistant Ratchet Handle for Easy Operation
The zinc-plated ratchet component of our Blackline ratchet straps features a long, wide handle for ease of use, even in tight spaces. The rubber-covered finger grips provide a comfortable and secure grip, making it easy to tighten and loosen the strap with minimal effort.

Chain Extension for Added Strength and Versatility
The 5/16" chain extension end hardware on our Blackline ratchet straps allows you to combine the strength of grade 70 transport chain with the softness of polyester webbing. This feature enables you to tie down your cargo using the rub rails or stake pockets on your truck or trailer without risking damage to the webbing part of the strap. The extra-length 18" chain extension is easy to wrap around your stake pocket, providing a more secure hold and the full working load limit of the stake pocket. The 2" D-ring, 14-1/2" chain, and clevis grab hook make it quick and easy to connect and disconnect the strap.

Industry Compliance and Customization Options
This 2-inch ratchet strap is tagged with the working load limit to meet CVSA guidelines, FMCSA and DOT regulations, and WSTDA, CHP, and North American Cargo Securement standards. For those looking for custom tie-down straps, we offer a range of length, color, and hardware options to suit your specific needs. We can also stencil your company name or logo onto the straps for added branding. Our manufacturing facility in Iowa ensures that all of our straps meet the same high quality standards and are shipped to you quickly.

Proper Load Handling and Securement Guidelines
According to the WSTDA, when using web tie-downs with a winch or ratchet, a minimum of 2 and a maximum of 4 wraps of webbing should be wound on the winch or ratchet mandrel. Excessive wraps may reduce the working load limit of the web tie-down and interfere with proper operation. The design factor, which is the ratio of the breaking strength to the working load limit, should be 3:1 for these tie-down straps to ensure safety and redundancy.

Complete Your Tie-Down System with Accessories
To complete your tie-down system, we offer a range of accessories including strap protection, D-rings, corner protectors, and more. We also provide transport chains and binders as an alternative tie-down solution, as well as an ergonomic Good-N-Tight ratchet strap tightening handle for added convenience. With the Force Blackline 2" X 30' Heavy-Duty Ratchet Strap With Chain Extension, you can trust that your cargo will be securely and safely tied down, no matter the conditions.